Artikel filtern
Filter
–
Tools
Item.: 90004 | Nom. size: H0/TT/N
Available, delivery time: 2-5 days
These 30° blades are very pointed and very sharp, making them ideal for modelling work. They can cut plastic, thin metal foils, card and paper, and are suitable for the cutting knife, item 90 003. Pack of 10.
€7.50*
SC: PS | AS: 0
Item.: 90009 | Nom. size: H0/TT/N
Available, delivery time: 2-5 days
A good pair of scissors belongs in every modelling workshop, and these particularly rugged scissors are very versatile. They have a long cutting area, permitting long, straight cuts to be made with ease. The blades are milled, making it easy to cut thicker materials because the material does not slip. The scissors are suitable for paper and card, but they can also cut thinner plastic panels and even sheets of brass, nickel silver and copper up to a thickness of 0.3 mm. A separable cross joint means the scissors can be dismantled for thorough cleaning without a tool. The cutting edges can be readjusted using an adjusting nut.
€26.50*
SC: PS | AS: 0
Item.: 90003 | Nom. size: H0/TT/N
Available, delivery time: 2-5 days
The rugged metal design of this cutting knife is particularly suitable for precisely cutting Auhagen plastic panels. Paper and card can also be cut with great precision. The pointed 30° snap-off blade is well suited for modelling work. In general, all 9 mm blades fit the knife. When the cutting edge becomes blunt, it can be removed using the breaking-off tool located in the end of the handle. A pack of ten 30° replacement blades is included. Further replacement blades are available using item number 90 004.
€9.50*
SC: PS | AS: 0
Item.: 90001 | Nom. size: H0/TT/N
Available, delivery time: 2-5 days
The Auhagen cutting mat is ideal for working with cutting knives, item 90 003, or modelling knives, item 90 005. Its structure of three different solid layers makes the mat practically indestructible. The surface ?heals? after each cut, so when you make the next cut, the cutting tool does not slip into an old groove and cause an untidy cut. The centimetre-spaced square grid printed on the mat makes it easier to lay out components and to trim to recurrent dimensions. The dimensions of the mat mean it is large enough to be able to work comfortably. The cutting mat is suitable for cutting paper and card, as well as Auhagen plastic panels. It is also an ideal base when trimming sprue from small parts with the cutting knife. 450 x 300 mm
€24.50*
SC: PS | AS: 0
Item.: 48659 | Nom. size: H0/TT/N
Available, delivery time: 2-5 days
Kit. With rope drum and 2 meter model rope. For use in conjunction with our motor No. 58 200. Prevents overloading of the motor, the rope or their model application by 3 adjustable force levels.
€11.50*
SC: PS | AS: 0
Out of stock
Item.: 90014 | Nom. size: H0/TT/N
Not available
41-piece drill set with hand borer for plastic, wood and metal. Modelling often requires very fine holes to be drilled. The hand-drill set provides you with a wide selection of very thin drill bits. The diameters range from 0.6 mm to 2.5 mm in 0.1 mm increments. The drill bit holder sits very comfortably in the hand and ensures precise work. There are two different collets, which are selected according to the drill bit size used. As the thin drill bits can break even when used carefully, all sizes are provided in duplicate in the sturdy and durable packaging.
€25.90*
SC: PS | AS: 8
Item.: 90013 | Nom. size: H0/TT/N
Available, delivery time: 2-5 days
These simple files have a hard cardboard core and two differently grained sides - the red side is coarser than the yellow one. They are particularly suitable for the deburring and finishing of components, making it very easy to remove residual material still remaining on components after the removal of sprue, for example. The modelling files are of a sufficient length to work with Auhagen plastic panels. Pack of 10.
€5.80*
SC: PS | AS: 0
Item.: 90005 | Nom. size: H0/TT/N
Available, delivery time: 2-5 days
With its non-slip handle, this high-quality modelling scalpel sits well and securely in the hand. In modelling, it is used for cutting paper, card and thin metal foils. The tough but flexible blade makes the knife also very well suited for the precise cutting of Auhagen plastic panels. The blade is easily replaced, using the Allen key in the protective cap to loosen and re-tighten the securing screw on the blade holder. Two versions of replacement blades are available: pointed (item 90 007) and short (item 90 006).
€12.50*
SC: PS | AS: 0
Item.: 78501 | Nom. size: H0/TT/N
Available, delivery time: 2-5 days
Two plastic tools specially developed by Auhagen for creating landscapes. The spatula is ideal for stirring and spreading filler. The ingenious scraper can be used to form irregular structures from Auhagen lightweight foam, item 78 301. Your creativity will find no limits! Both tools are made of high quality plastic.
€5.90*
SC: PS | AS: 0
Item.: 58200 | Nom. size: H0/TT/N
Available, delivery time: 2-5 days
Plug-and-play electric gear motor. Power supply via USB. Ideal for installation during the assembly of Auhagen models 11 471 and 13 353 (with more on the way). Can also be used for your own individual projects. Please make sure to note the product description included. 40 mm (+11 mm shaft, diam. 3 mm with flattened surface) × 32 mm × 23 mm, 21 rpm, 5V = USB
€33.50*
SC: PS | AS: 0
Item.: 53508
Available, delivery time: 2-5 days
For precise application of liquids such as adhesive.Solvent-resistant.Each 10 pieces 3.2 ml
€5.90*
SC: PS | AS: 0
Item.: 90010 | Nom. size: H0/TT/N
Available, delivery time: 2-5 days
This side cutter is ideal for trimming sprue from components. The smooth cutting edge cuts without a bevel, leaving no residue on the component. The rugged design means that even thicker parts can be cut. The pointed format of the cutting edges means that even the smallest parts can be cut off without damage to them. The return spring and the non-slip plastic handles guarantee comfortable working.
€15.50*
SC: PS | AS: 0